ELTIMA Software GmbH

Developer Tools > Project > Other

Description

If you need to run program as service, Application as Service can do that for you. This software tool makes it easy to run application as service and to take full advantage of the Windows services technology, all without necessity of modifying your program.

Among the benefits offered by Application as Service are very low CPU usage, custom environment variables, application monitoring, detailed event logging, and so on. This software tool provides an intuitive graphic user interface; besides, it can be easily configured via command line, either manually or from your application.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $79.95
• Size: 7 034kB

Platforms: C2k10, C2k6, C2k7, C2k9, CB3, CB4, CB5, CB6, CB64, CBXE, CBXE2, CBXE3, D2005, D2006, D2007, D2009, D2010, D3, D4, D5, D6, D7, DXE, DXE2, DXE3, DXE64

Applications in Delphi and BCB > Communications > Ports and Modems

Description

Serial Port Monitor is a professional and powerful system utility for RS232/422/485 COM ports monitoring. The program monitors, displays, logs and analyzes all serial port activity in a system. This is an ideal way to track down problems that may occur during application or driver development, testing and optimization of serial devices, etc.

Serial Port Monitor also offers advanced filtering and search, professional built-in terminal and data exporting options, user-friendly and flexible interface among its key advantages. It is a completely software solution, you don't need any additional hardware to use it.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $69.95
• Size: 3 451kB

Platforms: Vista, W2K, W2K3, W2K8, W7, W8, XP,

Developer Tools > Developer Tools > Other

Description

Eltima Serial Port Terminal is an ideal tool for testing, debugging and troubleshooting serial port devices. It lets you work with numerous number of ports simultaneously, both serial and virtual ones. You can easily alter baudrate, databits, parity, stop bits, flow control parameters and dynamically apply these changes to serial port settings on the go. You can always check for history of typed commands.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $39.95
• Size: 2 443kB

Platforms: D2005

Applications in Delphi and BCB > Multimedia > Flash

Description

Flash Decompiler Trillix is a feature rich and powerful SWF to FLA converter, which will help you decompile Flash movies, convert SWF elements into multiple formats and edit SWF files (dynamic texts, hyperlinks and more) on the go without Flash Studio installed. Since version 4.X you can also convert Flex files back into Flex projects in case your SWF files were built in Flex.

Moreover, you will be able to extract all elements from SWF files and save them to your hard drive in various formats.

Now Flash Decompiler fully supports Flash 5, 6, 7, 8, 9, Flash 10 and Flash CS5 and CS6, as well as Flex.

And last, but not least, is that Flash Decompiler supports batch conversion mode. You can simply leave several files to be converted and go have a cup of coffee while Flash Decompiler is working.

Flash Decompiler doesn't decompile Captivate projectors (EXE), projectors created outside of Adobe Flash.

Informations

• Status: Partially restricted
• Source: None
• price: $79.95
• Size: 12 558kB

Platforms: ME, NT4, Vista, W2K, W2K3, W2K8, W7, W8, W95, W98, XP,

Applications in Delphi and BCB > Multimedia > Flash

Description

Flash Optimizer is a handy software solution for web-masters, web-designers, Flash professionals and everyone who has ever come in touch with Macromedia Flash technology. It manages to reduce your SWF files size up to 60-70% thanks to amazing algorithms of vectors, shapes, morphing, Z-buffer, fonts and other optimizations. Unlike any other similar software Flash Optimizer manages to optimize not only a separate part of your Flash movie, but the whole SWF, including curves, zero-objects, ZLib optimization and a whole lot more advanced techniques. Its user-friendly interface lets you preview results in a player, view it frame-by-frame, zoom in/out, view detailed information about original and optimized files in the "SWF info" window. Flash Optimizer allows you to customize every optimization parameter, reaching the most profound compression with minimum quality loss. Flash Optimizer brings a significant power into hands of Flash users, allowing everyone to save traffic, time, interactivity and finally money.

Informations

• Status: Partially restricted
• Source: None
• price: $99.95
• Size: 18 037kB

Platforms: ME, NT4, Vista, W2K, W2K3, W2K8, W7, W98, XP,

Applications in Delphi and BCB > Files and Drives > Utilities

Description

Hide My Folders by Eltima Software allows hiding files and folders from viewing, accessing and searching completely, so that only you know that those files or folders exist. No matter how particular computer (over local network, from Internet or directly) is accessed, those folders stay invisible and safe.

Once you hide files/folders, Hide My Folders will not reveal its presence in your system, and the files will be hidden until you unhide them. No one can find out if any of the files or folders is hidden.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $39.95
• Size: 2 954kB

Platforms: NT4, W2K, W2K3, W2K8, W7, W8, XP,

Components > Files and Drives > Disk Access

Description

Hide My Folders ActiveX is a robust ActiveX Control that lets developers hide any file or folder in Windows system. You don't need to dive into hazy world of low-level file access functions. Once files or folders are hidden they cannot be accessed, searched for, viewed or deleted, therefore no one will know that they exist. Instead of specifying necessary file/folder names you could define pattern-matching mask to hide a group of files that complies with certain criteria such as same extensions or similar names. Using Hide My Folders ActiveX methods and properties you could easily implement advanced hiding features in your application saving time and efforts while focusing on other tasks.

Informations

• Status: Evaluation (time-limit)
• Source: On purchase/registration
• price: $199.95
• Size: 4 379kB

Platforms: C2k10, C2k6, C2k7, C2k9, CB5, CB6, CBXE, CBXE2, CBXE3, D2005, D2006, D2007, D2009, D2010, D4, D5, D6, D7, DXE, DXE2, DXE3

Components > Communications > Port and Modems

Description

Serial Port ActiveX Control is a powerful and versatile ActiveX component that lets you control serial ports, manage them and track their activity. It is a great alternative to complicated WinAPI for serial ports.

In Serial Port ActiveX you will find diverse methods to read/write to and from serial ports, plenty of properties for advanced configuration of serial ports as well as the complete range of events to control them. Integrating Serial Port ActiveX in your own software is quite easy thanks to sample code for major development environments that is bundled with our component. .

Informations

• Status: With Nag-Screen
• Source: None
• price: $199.95
• Size: 3 706kB

Platforms: C2k10, C2k6, C2k7, C2k9, CB3, CB4, CB5, CB6, CBXE, CBXE2, CBXE3, D2005, D2006, D2007, D2009, D2010, D3, D4, D5, D6, D7, DXE, DXE2, DXE3

Applications in Delphi and BCB > Communications > Ports and Modems

Description

Since the new version 4, Serial Splitter features new, handy and simple to use interface, which lets you not only split serial ports into several virtual ones, but also share one real port among several applications without creating the copies of your real port. Note, that you also can join many real ports into one virtual or create complex bundles with just several mouse clicks following assisting charts in Serial Splitter by Eltima.

Serial Splitter offers various types of ports managing (one-to-many, many-to-one, many-to-many ports' connections, serial port data redirection and more), where serial ports (physical or virtual ones or both kinds at once) are used at any side of the bundle you can easily create.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $99.95
• Size: 8 455kB

Platforms: NT4, Vista, W2K, W2K3, W7, XP,

Applications in Delphi and BCB > Communications > Ports and Modems

Description

Serial to Ethernet Connector is an advanced software solution developed to share serial port devices over TCP/IP network. Thus, any serial port device connected to COM port at local PC could be accessed from anywhere in the world via internet, for example. When the attached serial port device sends communication data it will be actually transmitted over TCP/IP network. Such behavior is achieved due to the use of virtual serial port technology which emulates standard COM ports. In that case Windows OS treats virtual serial ports in the same way as real ones therefore you are no longer limited to just two real ports (any number of physical ports you have) per system and may create COM port connections without occupying any real serial port. Formerly known as which allows you establish multiple connections to local serial port device and redistribute COM port device data all over the world. Server listens to all incoming connections at the defined TCP port and redirects input/output serial data to TCP/IP network. Serial to Ethernet Connector can be easily configured for current demands and provides a wide spectrum of data transmission modes.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $99.95
• Size: 4 443kB

Platforms: ME, NT4, Vista, W2K, W2K3, W2K8, W7, W8, W98, XP,

Developer Tools > Developer Tools > Drivers, Emulation, etc

Description

Shared Serial Ports ensures simultaneous, high-speed, bi-directional and collision-free connection to RS232 serial port for unlimited number of applications. All applications that connect to shared COM port will be able to communicate (send and receive data) with the device which is attached to real port as if they had an exclusive access to that device. As a result, Shared Serial Ports application lets you bypass one-application-per-one-serial-port limitation and provide certain applications with custom access rights

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $99.95
• Size: 2 974kB

Platforms: C2k10, C2k6, C2k7, C2k9, CB1, CB3, CB4, CB5, CB6, CBXE, D1, D2, D2005, D2006, D2007, D2009, D2010, D3, D4, D5, D6, D7, DXE

Applications in Delphi and BCB > Multimedia > Flash

Description

SWF & FLV Toolbox is an essential Flash to video tool that allows converting SWF to AVI, SWF to images; create your own screensaver out of SWF and even more. Plenty of flexible settings help achieve the most effective result ever. Just add your SWF file (or a bunch of them) to SWF & FLV Toolbox and configure conversion settings and press "Convert". And here you have the result you anticipated. BTW, you can even skip configuration step and just press "Convert" because SWF & FLV Toolbox already has the most common parameters set for your convenience.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $39.95
• Size: 11 519kB

Platforms: ME, NT4, Vista, W2K, W2K3, W2K8, W7, W8, W98, XP,

Applications in Delphi and BCB > System > Hardware

Description

USB Network Gate easily connects one or more remote USB devices to your computer over Ethernet (Internet/LAN/WAN) as if the device was plugged into your own machine. It helps you share a USB device over Ethernet among multiple computers so people from all over the world (or your office) can use it.

By intercepting USB port activity of a shared USB device and redirecting it via TCP/IP network USB Network Gate lets you access your printer, scanner, web-cam, USB dongle or any other supported USB device from your home PC or office laptop anywhere any time. Just plug the device in and it will automatically appear on the remote side of the connection.

You can secure your USB data by enabling traffic encryption and access your USB devices remotely via WiFi.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $89.95
• Size: 8 746kB

Platforms: Vista, W2K, W2K3, W2K8, W7, W8, XP,

Developer Tools > Developer Tools > Drivers, Emulation, etc

Description

Virtual Modem PRO 2.0 was designed to create software virtual IP-modems and to map them to virtual serial ports in your OS. Virtual Modem Pro emulates standard hardware modems. The main difference is that instead of using conventional telephone line, it uses Ethernet network, including Internet, VLAN, VPN, etc. Standard modems are connected to the computer via serial ports (COM1/COM2 or COM3/COM4). Virtual modem uses virtual serial ports that are complete copies of real serial ports. The main advantages of Virtual Modem Pro is speed and reliability of the transmitted data (since it uses fast Ethernet network and reliable TCP/IP protocol) as well as a considerable number (up to 255) of modems that can be created in any system. Every automation system that collects data from the remote hosts using modem and telephone line can greatly benefit from implementing Virtual Modem PRO. Among these are manufacturing/warehouse DAQ systems, fiscal/data transfers in a banking system, retail management, etc. Virtual Modem PRO uses virtual serial ports technology which fully emulates real serial ports and duplicates all their functionality. To create such connection the first virtual modem (local host) should be configured as a TCP/IP server that listens to incoming connections, while the other one (remote host) should be configured as a client to initiate the call. Every instance of the virtual modem could be configured to be server or client at any time depending whether you want to generate outgoing call or accept it (same as standard modems). In addition, you may specify the TCP port which will be used to establish the link and IP-address or hostname of the server to connect to. In order to establish such client-server connection you should install and set up Virtual Modem PRO on both ends. Single license allows you to install and use Virtual Modem PRO on two computers in a network.

Informations

• Status: Fully functional
• Source: None
• price: $179.95
• Size: 2 645kB

Platforms: C2k6, CB1, CB3, CB4, CB5, CB6, D2005, D2006, D5, D6, D7

Developer Tools > Developer Tools > Drivers, Emulation, etc

Description

Virtual Serial Ports Driver (VSPD) creates two pure virtual serial ports in your system which are virtually connected to each other. For other Windows applications, virtual ports will be seen exactly as two real serial ports connected via null-modem cable. You can select any virtual serial port number for virtual pair. For example, you can create virtual pair COM5-COM6. In this case all data sent by other applications to COM5 will arrive at COM6, and all data sent to COM6 will arrive at COM5. This can be seen if you run two HyperTerminals (or any other Windows terminal programs) and connect one of them to COM5 and other one to COM6. Then, all you type in first terminal will appear at second one. Of course, you can transfer files, other data or do whatever you want as it was real serial ports.

With VSPD you can connect one application to another using virtual serial ports pair. Applications will be able to exchange data. This solution can be used, for example, for GPS simulation programs.

Informations

• Status: Evaluation (time-limit)
• Source: None
• price: $99.95
• Size: 4 483kB

Platforms: C2k10, C2k6, C2k7, C2k9, CB1, CB3, CB4, CB5, CB6, CB64, CBXE, CBXE2, CBXE3, D1, D2, D2005, D2006, D2007, D2009, D2010, D3, D4, D5, D6, D7, DXE, DXE2, DXE3, DXE64

Applications in Delphi and BCB > Networks > Communications

Description

Network Virtual Serial Ports Driver is an advanced utility, the purpose of which is to emulate null-modem cable on computers located in a TCP/IP LAN or connected to the Internet. In other words, with VSPD Net you can create any number of pure virtual serial ports in your system, which will be connected over TCP/IP network to another computer via virtual null-modem cable. Real serial ports will not be occupied.

Example: You have two computers, host1 and host2 for example, connected with TCP/IP networking. You can create virtual serial port COM5 on host1 and virtual serial port COM6 on host2 and connect those ports to each other via virtual null-modem cable. Everything, that application on host1 will send to COM5 will be received by application on host2 at COM6, and all that application on host2 sends to COM6 will be received by application on host1 at COM5.

Informations

• Status: Fully functional
• Source: None
• price: $111.95
• Size: 2 538kB

Platforms: ME, NT4, W2K, W2K3, W98, XP,