Lukas Gebauer

Author Homepage: http://synapse.ararat.cz/

Send e-mail to this Author

Využijte prosincové slevy na Delphi a C++Builder:

  • 20% na edice Professional
  • 30% na edice Enterprise
  • 40% na edice Architect

Author Products

Total 4 products

Synapse TCP/IP Library v.40

Components > Internet > Packs

By Lukas Gebauer.

Freeware + source 09 Oct 2014

Description

Synapse TCP/IP library for Delphi, Kylix, FreePascal or C++Builder.

Informations

  • Status: Fully functional
  • Source: Included
  • Size: 899kB

Platforms: C2k10, C2k6, C2k7, C2k9, CB3, CB4, CB5, CB6, CBXE, CBXE2, D2005, D2006, D2007, D2009, D2010, D3, D4, D5, D6, D7, DXE, DXE2

Synapse TCP/IP Library v.40

Kylix > Components > Internet

By Lukas Gebauer.

Freeware + source 09 Oct 2014

Description

Synapse TCP/IP library for Delphi, Kylix, FreePascal or C++Builder.

Informations

  • Status: Fully functional
  • Source: Included
  • Size: 899kB

Platforms: KLX1, KLX2, KLX3

SynaSer Serial Port Library v.16

Components > Communications > Port and Modems

By Lukas Gebauer.

Freeware + source 27 Jan 2008

Description

Synaser is 'brother' of Synapse TCP/IP Library. It provides same communication principes as used in Synapse, but Synaser is for serial ports, not for TCP/IP.

This is list of basic features:

  • SynaSer is not components, but only classes and routines. Not needed any installation.
  • Working under Windows (Delphi or C++Builder) and under Linux (Kylix).
  • Support for communicating on serial ports in blocking (synchronous) mode.
  • Supported is high speed of communication (about few megabytes per second).
  • Consume very low CPU time.
  • Supported is same communication mechanism as used in Synapse TCP/IP library.
  • Can lock serial port under Linux (like Windows do it).
  • Support for software and hardware handshake.
  • You may open any COM port, if exists in you system (i.e. COM156).
  • Support for RTS driven communication (good for RS485 convertors, etc).
  • Option for detect device presence before each data transmission.

Informations

  • Status: Fully functional
  • Source: Included
  • Size: 40kB

Platforms: C2k6, CB3, CB4, CB5, CB6, D2, D2005, D2006, D3, D4, D5, D6, D7

SynaSer Serial Port Library v.16

Kylix > Components > Communications

By Lukas Gebauer.

Freeware + source 27 Jan 2008

Description

Synaser is 'brother' of Synapse TCP/IP Library. It priovides same communication principes as used in Synapse, but Synaser is for serial ports, not for TCP/IP.

This is list of basic features:

  • SynaSer is not components, but only classes and routines. Not needed any installation.
  • Working under Windows (Delphi or C++Builder) and under Linux (Kylix).
  • Support for communicating on serial ports in blocking (synchronous) mode.
  • Supported is high speed of communication (about few megabytes per second).
  • Consume very low CPU time.
  • Supported is same communication mechanism as used in Synapse TCP/IP library.
  • Can lock serial port under Linux (like Windows do it).
  • Support for software and hardware handshake.
  • You may open any COM port, if exists in you system (i.e. COM156).
  • Support for RTS driven communication (good for RS485 convertors, etc.).
  • Option for detect device presence before each data transmission.

Informations

  • Status: Fully functional
  • Source: Included
  • Size: 40kB

Platforms: KLX1, KLX2, KLX3