Description

The Custom MsgBox and StatusBox Unit contains highly customised messagebox functions & status windows. You can adjust button sizes, fonts & redefine standard button captions. In addition, you can make the messagebox play the sound you want, show any icon you want, show nearly as many button as you want with customised glyphs & captions without any extra effort.

The status window functions can show any picture you want, play the sound you want, display a progress bar (gauge) and a cancel button.

Add the mb unit to your program uses clause, and it is ready for use. Documentation is located in the mb.pas unit.

Informations

• Status: Fully functional
• Source: Included
• Size: 12kB

Platforms: D6

Description

TCustomMessage allow show customize messages, with any buttons, any text, etc.

Informations

• Status: Fully functional
• Source: Included
• Size: 2kB

Platforms: D3, D4, D6, D7

Description

This unit provides a MessageDlg replacement function that allows the user to specify whether or not they want to see the message in the future or not.

Informations

• Status: Fully functional
• Source: Included
• Size: 77kB

Platforms: CB1, CB3, CB4, CB5, D1, D2, D3, D4, D5, D6

Description

International Message Dialogs supports nine languages: English, Russian, Portuguese, Turkish, German, Dutch, French, Greek and Spanish.

Informations

• Status: Fully functional
• Source: Included
• Size: 6kB

Platforms: D2, D3

Description

The LMD Dialog Pack consists of a number of components that not only emulate the Windows Vista TaskDialog and TaskDialogIndirect API functions on other operating systems but also provices enhancements over those APIs (e.g. custom header settings, extented text formatting, integration of checkboxes etc)..

There are components for enhancing the dialogs with edit controls and also replacing the Radio Button functionality with Check Boxes. Also included are three Password specific dialogs, that allow you to capture password information by dropping a component on your form and writing a line or two of validation code.

LMD DialogPack allows you to create applications that look and act like they are using the native Vista and Windows 7 API. With LMD DialogPack you can:

• Create and configure new dialogs easily.
• Create complex dialogs that accept and require several inputs. If default options are not sufficient, you can use frames to insert any controls into your dialog.
• Take advantage of visual Component Editors and IDE Expert for dialog creations.
• Ready to use editor templates for fast code creation.
• Modify only your uses clause of existing applications to use the new dialog look and feel.
• Control the appearance of all your applications Dialogs in one place.
• Centralized resource strings for easy translation into the language you require.

Informations

• Status: Trial (work while IDE is running)
• Source: On purchase/registration
• price: $79
• Size: 30kB

Platforms: CBXE, DXE, CBXE2, DXE2, CBXE3, DXE3, CBXE4, DXE4, CBXE5, DXE5, CBXE6, DXE6, CBXE7, DXE7, CBXE8, DXE8, C10, D10, C10.2, D10.2, C10.3, D10.3, C10.4, D10.4, C11, D11, C2k6, D2006, C2k7, D2007, C2k9, D2009, C2k10, D2010, C10.1, D10.1, D6, D7, D2005

Description

Localize your Dialogs and add nice visual effects without writing code.

Informations

• Status: Fully functional
• Source: Included
• Exe demo: included
• Size: 669kB

Platforms: D2005, D5, D6, D7

Description

This unit implements a replacement for Delphi's MessageDlg function, that uses a resource file instead of having the text hard-coded into the unit. This makes it very easy to translate the messages and use the MessageDlg functions within applications writen in languages other than English.

Informations

• Status: Fully functional
• Source: Included
• Size: 8kB

Platforms: D1, D2, D3

Description

The MsgDlg component simplify the Delphi function "MessageDlg". It allowes you to show message dialogs in a very easy way.

Informations

• Status: Fully functional
• Source: Included
• Size: 5kB

Platforms: D2, D3, D4, D5

Description

Timed Message Dialog is a simple message box which will automatically close after a given period.

Informations

• Status: Fully functional
• Source: Included
• Size: 3kB

Platforms: D1

Description

This component gives you a way to customize your Message Dialogs. You can choose between 4 predefined icons and 3 styles or you can select your own. Fully customizable buttons (standard and custom):

• Easy Localization
• Buttons order
• Buttons size
• Buttons icons
• Custom Font
• Default button
• Cancel button
• Design time test of dialog.

Informations

• Status: Fully functional
• Source: Included
• Size: 47kB

Platforms: D3, D4, D5

Description

TAdvMsgBox provides an easy way to memorize a user's decision. If the message starts nagging him, he can mark the checkbox. The TAdvMsgBox will save the result of the message box to the registry. If the program subsequently Execute's the message box, it will not be shown but the result saved to the registry will be used.

Informations

• Status: Fully functional
• Source: Included
• Size: 7kB

Platforms: D3, D4, D5

Description

The TDcjMessageDlg component makes it easy to create custom message boxes that have buttons of various quantity, size, alignment, etc... It comes with a Buttons property editor, a full online Windows help file.

Informations

• Status: Fully functional
• Source: Included
• Size: 32kB

Platforms: CB1, CB3

Description

Shows a dialog for critical situations, where you must enter "Yes" to continue.

Informations

• Status: Fully functional
• Source: Included
• Size: 14kB

Platforms: D3

Description

TMessageDlg is an enhanced MessageDlg component. All of the parameters of the MessageDlg function in Delphi have been implemented along with numerous additional properties such as a "Don't show me this again." checkbox, a timeout value that will automatically close the dialog after a defined number of seconds. The ModalResult gets stored in the registry or an INI file. It's modal and modeless. It contains a TGauge component that can be used to show the progress of something else going on in your application.

Informations

• Status: Fully functional
• Source: Included
• Size: 9kB

Platforms: D5

Description

Component for showing three kind of messages.

Informations

• Status: Fully functional
• Source: Included
• Size: 2kB

Platforms: D5

Description

VCL implementation of a MessageBox (or message dialog) with a checkbox, usually of a kind "Don't ask me more".

Informations

• Status: Fully functional
• Source: Included
• Size: 11kB

Platforms: CB3, CB4, CB5, CB6

Description

This unit provides three customisable message dialog box components. Each component enables any of the standard Windows icons to be displayed in the message box, or the icon can come from a user defined icon resource. Various combination of buttons and titles can be displayed. The dialogs can also provide a Help button that calls a specified help topic in a nominated help file when clicked. The components are discussed below.

• TPJWinMsgDlg - This component wraps the Windows MessageBoxIndirect API call and displays a message box based on that provided by Windows. TPJWinMsgDlg will be suitable for most purposes and has a light footprint.
• TPJVCLMsgDlg - This component uses the Delphi VCL CreateMessageDialog function to create a form based message box. (CreateMessageDialog is used by the standard Delphi MessageDlgXXX functions). The component provides more flexibility than either the Delphi functions or TPJWinMsgDlg. TPJVCLMsgDlg should be used when it is necessary to display buttons or combinations of buttons that are not supported by the Windows API message box or when a finer degree of control over the appearance and behaviour of the message box is required. TPJVCLMsgDlg supports all the features of TPJWinMsgDlg and extends them. From v2.2 the underlying dialog form can be cutomised using the new OnShow and OnHide events.
• TPJMessageDialog - This is an updated version of the component supplied in release 1 of this unit. Various bugs have been fixed and the handling of user icons improved. This component is provided for backwards compatibility with release 1 and exposes the same properties as the old component. Some of these properties vary from those common to TPJWinMsgDlg and TPJVCLMsgDlg. It is recommended that TPJWinMsgDlg or TPJVCLMsgDlg are used in new projects.

An OpenHelp compatible help file is supplied that provides help on all the components. The help file integrates with the help system of Delphi 4 to 7. Although it does not integrate with the Delphi 2005 and later IDEs it can be used independently of the IDE, albeit with some loss of functionality. An a-link keyword (.als) file is also supplied to assist in integration with Delphi 6 and 7 help.

A demo program is provided that exercises the three components.

Informations

• Status: Fully functional
• Source: Included
• Exe demo: included
• Size: 58kB

Platforms: D2005, D2006, D4, D5, D6, D7

Description

Message Dialog which works like MessageDlg function in Delphi, but with "Don't remind me again" check box which hooks to the registry.

Informations

• Status: Fully functional
• Source: Included
• Size: 22kB

Platforms: D2, D3, D4, D5

Description

TSplashMessage is a component for those who wish to provide the ability to splash a Message directly on the screen. However, TSplashMessage also gives users the ability to stop some processing taking place during run-time. TSplashMessage is more than just a MessageDlg screen. Although it looks similar to the Delphi MessageDlg, it is much more flexible, and useful. The problem with a MessageDlg is that it is created as a modal window. With a modal window, as you know, no processing can continue until the window has been addressed. Using TSplashMessage, this is no longer a problem. TSplashMessage is not created as a modal window, but it can act like a modal window via the modal property. This is probably the most useful feature about TSplashMessage, and it's what sets it apart from a MessageDlg window.

Informations

• Status: Fully functional
• Source: Included
• Size: 48kB

Platforms: D1, D2, D3

Description

Component of MessageDlg function, coming up with many additional features compared to the MessageDlg:

• You are using a component, so you can edit the message at design time in the Object Inspector itself. So there's no need of writing long code if you want you display large texts in your dialog
• You can parameters like in TQuery component that you can assign a value during runtime
• Caption of the buttons is user defined
• Background color of dialog is user defined
• User defined font
• User defined title caption
• Possibility of showing the glyphs on the buttons
• User definable icons (or standard icons from MessageDlg)
• User definable WAV sound (or standard Windows Sound)
• Possibility of making a preview already during runtime.

Informations

• Status: Fully functional
• Source: Included
• Size: 31kB

Platforms: D2, D3