Description

The aaxBattery ActiveX Control is a component that gives you the state of the battery on your laptop/notebook computer. With this component, you can:

• Get the battery life in percent and time;
• Get the charging status of the battery;
• Get the AC Line state.

This component comes with full documentation and many Visual Basic samples.

Informations

• Status: With Nag-Screen
• Source: N/A
• price: $25
• Size: 655kB

Platforms: CB6, D6, D7

Description

Bind to EXE library enables your application to bind/extract files to/from an executable file at runtime. It consists of two classes, TBindToEXE and TExtractFromEXE, corresponding to two working stages, i.e. binding and extracting stage.

In binding stage, TBindToEXE can embed a collection of files in a single executable file dynamically. The embedded files can be compressed to reduce their size. There are 10 compression levels, from 0 (fastest but no compression) to 9 (slowest but maximum compression). You can select a level according to your requirements.

The embedded files can also be encrypted to increase their securities. Blowfish algorithm, one of the most secure encryption algorithms in the world, is employed to encrypt the files.

In extracting stage, TExtractFromEXE can retrieve information about the collection of files embedded in the executable file, or just extract one or more files from the executable file specified by their names or IDs.

Informations

• Status: With Nag-Screen
• Source: N/A
• price: $49.95
• Size: 1 541kB

Platforms: CB5, D4, D5, D6

Description

File system monitor filter can monitor the file system activities on the fly. With file system monitor filter you can monitor the file activities on file system level.File system control filter can control the file activities, which you can intercept the file system call, modify its content before or after the request goes down to the file system, allow/deny/cancel its execution based on the filter rule.

Informations

• Status: Fully functional
• Source: None
• price: $1499
• Size: 1 661kB

Platforms: CB5, CB6, D6

Description

A Delphi class implementing file stream which can grow over 4GB. Class has better support for file sharing than TFileStream and has abilities of Win32 API CreateFile, so you can open pipes, mail slots or physical drives and so on.

Informations

• Status: Fully functional
• Source: On purchase/registration
• Source price: $14.99
• Size: 5kB

Platforms: D5

Description

FileManager is a Delphi component that serves as a file manager for your application. Imagine a simple text editor. If the edited text is dirty (modified), prior to close or create a new text editor, it must ask user a filename in which it can save the text, or it saves without asking the filename if the text is saved before. There's also a sub menu (usually under File menu) that contains most recent files (MRU), that if user click on it, will launch the file. Of course it will ask to save current edited text prior to opening the file.

This component can handle all the above tasks seamlessly. It will save you lot of time, and is very easy to use. It is used extensively in all author's programs.

Informations

• Status: Fully functional
• Source: Included
• Size: 242kB

Platforms: D2005, D2006, D6, D7

Description

A parser for a Fixed format, and char separated data files.

Informations

• Status: Fully functional
• Source: None
• Size: 21kB

Platforms: D5, D6, D7

Description

Upgrade of Peter Martinsson's TFileSource object. TFileSource for Delphi 7.

Informations

• Status: Fully functional
• Source: Included
• Size: 379kB

Platforms: D7

Description

Encapsulation of Windows file-handling routines that allows work with >2GB files. Included is support for non-buffered access (FILE_FLAG_NO_BUFFERING) and buffering for sequentially accessed files. TGpHugeFile is interface to 64-bit file functions with some added functionality. TGpHugeFileStream is descendant of TStream that wraps TGpHugeFile.

Requires DSiWin32.

Informations

• Status: Fully functional
• Source: Included
• Size: 133kB

Platforms: D2005, D2006, D2007, D2009, D2010, D5, D6, D7, DXE, DXE2, DXE3

Description

Is a component that allow to package files o fulls directories (with yours subdirectories) in one only file. The main methods are:

• PackageDirectory: To package one directory with yours subdirectories.
• Unpackage: Unpackage a package of files.
• ExtractFile: To extract one file of one package.
• ReadPackage: Extract all information of a package(Files, size and position into the package).
• Findfile: Seek a file into the package.

Informations

• Status: Fully functional
• Source: None
• Size: 11kB

Platforms: D7

Description

TStripReloc is a class which refact from Jordan Russell's StripReloc.dpr.

StripReloc is a free (GPL license) command line utility that removes the relocation (".reloc") section from Win32 PE EXE files, reducing their size. Most compilers/linkers (including Delphi) put a relocation section in EXE files, but this is actually not necessary since EXEs never get relocated. Hence, a relocation section only wastes space.

This program is designed for developers to run on their own applications' executables only. It is not recommended that you run StripReloc indiscriminately on all EXEs you come across, because certain programs may rely on their internal structure staying intact.

StripReloc will not run on DLLs because they can get relocated, and thus need a relocation section.

EXEs run through StripReloc work on all Windows OSes since Windows 95 and NT 3.51 (at least). Windows 3.1x with Win32s is not supported.

Informations

• Status: Fully functional
• Source: Included
• Size: 273kB

Platforms: D2005, D2006, D7

Description

Almost the same as TFileStream, but uses Windows NT functions allowing for the asynchronous file I/O.

Informations

• Status: Fully functional
• Source: Included
• Size: 7kB

Platforms: D2, D3

Description

This component find wav type file in any file. For searching wav press right button on this component.

Informations

• Status: Fully functional
• Source: On request
• Size: 23kB

Platforms: D2, D3, D4

Description

Invisible Control for easy read from and write to streams. almost all datatypes can be writing. works like inifiles. It is also posibility to Encode/Decode to a File or stream by setting the cryptFile Property.

Support for Bitmap, JPG, PNG, Metafiles and Icon images.

This Component use the dcpCrypt2 Cryption components, so you must have it installed before you install this component

This version is not compitable with previous versions. but the previous versions will still be available from our site, if you prefers it.

Informations

• Status: Fully functional
• Source: Included
• Size: 1 609kB

Platforms: D2007, D2009, D2010, DXE

Description

Homegrowns DirNavigator component is a recursive directory navigator. With a single call to the Navigate method TDirNavigator will walk the directory tree from the current directory.

Informations

• Status: Fully functional
• Source: Included
• Size: 7kB

Platforms: D1, D2

Description

TFileData components for work with clasic files as tables. Can build your applications with all standard Delphi components.

Variant files:

• standard files with fixed record length and variable position [sort, locate, seek]
• indexed files with delete flag [search, locate]
• connection files to DBconnection
• sharing files
• can using memory files, filters.

Data type is allowed byte, word, smallint, integer, float, currency, datetime, string, char, autoinc and variant definition with "case". Autoinc for all type files.

Informations

• Status: Fully functional
• Source: Included
• Size: 91kB

Platforms: D6

Description

The purpose of this component is to be able to store any kind of file in the .exe file. This is useful if a component needs a file and you don't want to supply the extra file.

Informations

• Status: Fully functional
• Source: Included
• Size: 16kB

Platforms: D2

Description

This is a component to get the Windows Folders (f.e. 'C:WindowsStartmenu').

Informations

• Status: Fully functional
• Source: Included
• Size: 10kB

Platforms: D4

Description

TGpTextFile is textfile class that can access odinary and Unicode text files. Supports FilePos, FileSize, Seek. Based on TGpHugeFile. TGpTextFileStream is descendant of TStream that wraps TGpTextFile.

Informations

• Status: Fully functional
• Source: Included
• Size: 116kB

Platforms: D2005, D2006, D2007, D2009, D2010, D5, D6, D7, DXE

Description

With TPartMetFile you can read the ".part.met" files created by eDonkey and emule in Temp folder. Is possible read the filename, size, bytes transfered, status, hash, priority...

Informations

• Status: Fully functional
• Source: Included
• Exe demo: included
• Size: 238kB

Platforms: D5, D6, D7

Description

Rescue the file in a directory and his subdirectory adding them to a list. Include some personalisation of the rescue process.

Informations

• Status: Fully functional
• Source: Included
• Size: 9kB

Platforms: D6

Description

Variable filer and streamer for Delphi. Collect different types of variables and save them into one file or stream. TScwVarFiler reads and writes on files, streams and Strings. You can collect Strings, Integers and Dates, in fact everything that can be stored in a variant. In addition you can collect Streams and Images.

Informations

• Status: Fully functional
• Source: Included
• Size: 10kB

Platforms: D3, D4, D5, D6, D7

Description

A component to easily create temporary files. It take cares of assigning a unique file name in the temporary directory, and automatically delete all created files once the application closes.

Informations

• Status: Fully functional
• Source: Included
• Size: 6kB

Platforms: D1, D2

Description

The component provides the following 3 main function groups

• Searching: You can search for strings (ascii or binary) in any kind of file or stream.
• Version Information: You can extract version information (like Company Name, File Version) for Windows PE Exe / DLL files.
• Entropy: You can calculate the file entropy of a given file and find out (for Win32 PE files) if the file is most likely compressed.

Informations

• Status: Fully functional
• Source: On purchase/registration
• Source price: $29
• Size: 226kB

Platforms: D7

Description

VarFile component, and two supporting components, handle small to moderate sized files with variable length records. All source included, help files, a utility to create VarFiles and maintain them, and a sample application to see how to code with them.

Informations

• Status: Fully functional
• Source: Included
• Size: 334kB

Platforms: D3