Description

ExceleTel TeleTools is a programmer's tool that allows object-based access to Microsoft's Telephony API (TAPI), which equates to easy and hardware-independent control of telephony and modem cards.

Informations

• Status: Trial (work while IDE is running)
• Source: N/A
• price: $95
• Size: 4 549kB

Platforms: CB4, CB5, CB6, D5, D6, D7

Description

hbTapi Components is a collection of easy to use Delphi VCL components allowing object-based access to Microsoft's Telephony API (TAPI).

Just a few features of hbTapi Components:

• Support multiple phones, lines, calls per line, and multiple addresses
• Enumerate installed line and phone devices
• Discover device hardware capabilities
• Complete call control
• Make Call - Dial full or partial number
• Call progress messages and call state
• Translate telephone number - Using dialing properties
• Display CallerID information - Name, number
• Detect ringing, busy, connect, disconnect, and much more...
• Use Hold, Unhold, Park, Transfer, Redirect and more...
• Use Conference Calling, Three Way Calls and more...
• Detect/Generate DTMF tones - local and remote party key presses
• Wave Playback and Recording
• Enumerate Location Names
• Get/set Current Location, Country Code, ...
• Control speakerphones,handsets and headsets
• Control display, buttons and lamps
• Create "Assisted Telephony" applications
• Send/Receive binary data
• Many more...

Informations

• Status: Trial (work while IDE is running)
• Source: On purchase/registration
• price: $250
• Source price: $860
• Size: 7 805kB

Platforms: D2005, D2006, D2007, D2009, D2010, D7, DXE, DXE2, DXE3, DXE4, DXE5, DXE6, DXE7

Description

Delphi implementation of the Windows Telephony headers. There's a test program that can monitor calls made with other TAPI enabled programs like Remote Access and can also dial calls. Also there's a mini-terminal that shows how to use TAPI to place calls and obtain the COM handle.

Informations

• Status: Fully functional
• Source: Included
• Size: 28kB

Platforms: D2

Description

PhoneTone Decoder is the high performance , stable and very easy to used ActiveX Control to decode variant of tone signals.

Written in C++ using ATL Active Template Library, PhoneTone Decoder is lightweight with no dependencies and can be used on Windows 98, Windows ME, Windows NT 4, Windows 2000 and Windows XP.

Component features:

• Decode DTMF from wave file or wave stream or wave/in devices.
• Decode FSK Caller-ID from...
• Decode TTY/TDD Baudot code from...
• Detect the custom tone signal from...
• Convert wave-form to spectrum from...
• Many more...

Demo samples for Delphi, VB, VB.NET, C#, Visual C++ are available.

Informations

• Status: Evaluation (time-limit)
• Source: On purchase/registration
• price: $99
• Exe demo: included
• Size: 2 058kB

Platforms: C2k6, CB4, CB5, CB6, D2005, D2006, D3, D4, D5, D6, D7

Description

Translated Telephony API (TAPI) 2.0 header files for Delphi. Now includes support for developing custom TAPI service providers. For more information about TAPI, check Microsoft Developer Network.

Informations

• Status: Fully functional
• Source: Included
• Size: 42kB

Platforms: D1, D2

Description

A Small Demo Programm which explains how to use TAPI Interface.

• Very simple to use.
• Support multiple phones.
• Call progress messages and call state.
• Translate telephone number - Using dialing properties.
• Display CallerID information - Name, number.
• TAPI Line Report.

Informations

• Status: Demo only
• Source: On purchase/registration
• Source price: $299
• Size: 271kB

Platforms: D5, D6, D7

Description

TAPI based component for dialing telephone numbers. Now supports TAPI 2.0.

Informations

• Status: Fully functional
• Source: Included
• Size: 51kB

Platforms: D3

Description

Telephony development component (ActiveX Control), extensition of Microsoft TAPI2.0,support multi-lines, multi-calls per line, help you build you IVR system in few minutes. It can release you from the drudgery of writing low-level code. It makes adding computer telephony to your applications easy.

Component Features:

• TTS (Text to Speech),
• Speech Recognition,
• Custom phone signals detection,
• Conference,
• Transfer,
• Caller ID - Name, number,
• Playback WAV over phone line,
• Record WAV files from phone line,
• Generate DTMF - Generate tones - 0-9, *, #, A-D
• Detect DTMF tones - remote party key presses,
• Park, UnPark, Pickup, Answer, make, drop, hold, unhold ... phone call.

Informations

• Status: Evaluation (time-limit)
• Source: On purchase/registration
• Exe demo: included
• Size: 2 830kB

Platforms: C2k10, C2k6, C2k7, C2k9, CB5, CB6, CBXE, CBXE2, CBXE3, CBXE4, CBXE5, CBXE6, CBXE7, D2005, D2006, D2007, D2009, D2010, D4, D5, D6, D7, DXE, DXE2, DXE3, DXE4, DXE5, DXE6, DXE7

Description

Component is based on Windows Telephone API (TAPI) service. Use this component for the following tasks:

• voice and datamodem outbound and incoming calls
• call redirection and blind trasfert, consulation call, consulation call with transfer or conference
• CallerID
• monitor and send DTMF tone digits
• play and record sound with pause, stop and resume
• transfer data between two computers
• OnNewData event, which let you know that when new data arrives to communication port
• get direct access to your modems under Windows (for special initializing via AT commands)
• ability to use different languages, english and german are included.

Informations

• Status: Trial (work while IDE is running)
• Source: On purchase/registration
• price: $30
• Source price: $20
• Exe demo: included
• Size: 1 613kB

Platforms: D5, D6, D7

Description

Powerful TAPI wrapper allows:

• Caller ID - Name, number
• Answer
• Hangup
• Call progress
• Make Call
• Dial - Completion of dialing on existing call
• Generate DTMF - Generate tones - 0-9, *, #, A-D
• Generate single frequency tones (beeps)
• Generate multi frequency tones
• Generate simple melodies
• Detect DTMF tones - remote party key presses
• Execute any commands on modem (passthrough mode)
• Enumerate telephony devices
• Telephony device setup dialog
• Get/Set Current Line Device
• Enumerate installed telephony/modem devices
• Software Silence Detection
• Software busy and dialtone detection
• Software media tone detector - single and dual frequency detector
• Text-to-speech support (SAPI4 and SAPI5)
• Playback WAV files (in any format.) over phone line
• Record WAV files from phone line.

Informations

• Status: Partially restricted
• Source: On request
• price: $199
• Size: 293kB

Platforms: C2k6, CB1, CB3, CB4, CB5, CB6, D1, D2, D2005, D2006, D2007, D3, D4, D5, D6, D7